Tips to Prepare a Surface for Sealcoating

Sealcoating is an essential part of maintaining the look and quality of your pavement. It helps to protect the surface from the effects of weathering and traffic. However, before you can apply the sealcoat, you need to make sure that the surface is properly prepared. In this blog post, we'll go over some tips and tricks to get your pavement ready for sealcoating. If you're looking for asphalt contractors in Lake County, FL, contact Reliable Pavement Maintenance today to request an estimate.

1. Clean the Surface

The first step to preparing the surface for sealcoating is to clean it properly. This means removing all debris, dirt, and grease from the pavement. You can use a broom, blower, or pressure washer to do this. The surface should be completely dry before moving on to the next step.

2. Repair Cracks and Holes

Before applying the sealcoat, you need to make sure that the surface is smooth and level. Any cracks or holes in the pavement need to be filled. You can use asphalt patching compound for this task. Make sure to allow the filler to dry completely before moving on to the next step.

3. Sealcoat the Edges

Next, you need to sealcoat the edges of the pavement. This involves applying a thin layer of sealer along the edges using a brush or squeegee. Make sure to only apply the sealer to the edges as it will help to prevent any sealer from getting onto surrounding surfaces.

4. Apply the Sealcoat

Finally, it's time to apply the sealcoat. You can use a sprayer or squeegee to apply the sealer evenly across the surface. Make sure to work quickly and evenly to avoid any thick spots or thin spots.

5. Allow the Surface to Cure

Once you've applied the sealcoat, you need to allow the surface to cure. This typically takes anywhere from 24-48 hours. During this time, make sure that no one drives or walks on the surface to avoid any damage or footprints.

Conclusion

If you're looking to prolong the lifespan of your pavement and keep it looking great, then sealcoating is an essential part of maintenance. However, to get the best results, you need to prepare the surface properly beforehand. By following the tips outlined in this blog, you can ensure that your pavement is perfectly prepped for application of the sealcoat. If you're in need of asphalt contractors in Lake County, FL, don't hesitate to contact Reliable Pavement Maintenance today to get an estimate.